A clean car is a happy car, and quality leather should be the only real tool a body shop needs. But sometimes it can be a daunting task to get to the point where you just have to swipe every now and then.
Car cleaning is less of an art form than a form of therapy that can benefit the car cleaner, especially if done correctly.
The first plan of action for cleaning the car should be
a bucket of hot soapy water and a clean sponge close at hand. It is important that the sponge is clean of dirt so that it does not scratch the paint when cleaning the car.
We should also have a way to wash the foam and another bucket of hot enough water. Not hot enough to burn, but definitely hotter than hot. Start by cleaning the roof of the car, clean with soapy water and sponges, but only the roof. Once the roof is clean, it’s time to wash it with soapy water and fresh water. Now remove the skin in hot water, rinse off the excess and dry the roof. This creates an effect that makes the ceiling look like it’s just been polished, but more will clarify it later.
For the next clean car,
the same process must be repeated for the hood, then the trunk or whatever, once on the road. Always try to finish the highest area first to avoid leaving soap and water on areas that have already been covered. Be sure to include Windows in the process.
It is important to remember that the soapy water should be a real car cleaner, not the same liquid that is used to wash dishes. It is also important to only do one part at a time. In this way, it removes any residual stains left behind by washing the entire car at once.
After cleaning every panel of the car in this way (including the windows), it should look very bright and shiny. It’s time to focus on the wheels and tires while you wait for the excess water in the small water bags to dry.
You should use a sponge and a bar of soap on the car rims
then it should be the right car rim cleaner and then the water should be nice and hot. After washing the bike, it should be thoroughly rinsed and each wheel should be cleaned separately.
It is important to spend time on the bikes, as they can be particularly dirty in some cases, and you should keep them as clean as possible.
When the car wheels are done, the next job is to polish the whole car with an antistatic cloth. It removes all fingerprints and smudges that remain on the skin and cannot be picked up. Now the car not only looks shiny, clean and shiny, but also silky smooth finally, it’s the bike’s turn. They require old jam or similar, unused brush and black liquid behind. It should be painted as thin as possible on the wheels to prevent bleeding. It should be dry and put on at least an hour or two before riding, otherwise they may leave marks on the edges.
All Bil rengøring leave the car looking good enough to go to the showroom, but at best the car only needs warm water and leather for the next cleaning jobs.
The first plan of action for cleaning the car should be
a bucket of hot soapy water and a clean sponge close at hand. It is important that the sponge is clean of dirt so that it does not scratch the paint when cleaning the car.
We should also have a way to wash the foam and another bucket of hot enough water. Not hot enough to burn, but definitely hotter than hot. Start by cleaning the roof of the car, clean with soapy water and sponges, but only the roof. Once the roof is clean, it’s time to wash it with soapy water and fresh water. Now remove the skin in hot water, rinse off the excess and dry the roof. This creates an effect that makes the ceiling look like it’s just been polished, but more will clarify it later.
